Multimediamayhem

Custom props for less

proton pack

So you want to build yourself your very own unlicensed nuclear accelerator? Well you'll need a few things to acheive your goal. Here's a basic list of parts:

This is not a definative list but merely a guideline, you will need to modify for your particular build and budget.

  1. Pack shell (fiberglass, vacformed, wood, etc.)
  2. Motherboard (aluminum or wood)
  3. A.L.I.C.E LC 1 or LC2 pack frame
  5. Bumper
  6. Bumper shock mount
  7. Injector tubes x2
  8. Filler tubes x2
  9. Clippard R-331 valve (real or resin copy)
  10. Booster tube and plug
  11. Booster frame
  12. Ribbon cable ( GB 1 or GB2 style)
  13. Ribbon cable clamp
  14. P-clamp
  16. Ion arm cap
  17. Resistors ( 1x Dale PH-25,1x  Sage silohm 25,1x  Dale RH-50 (GB2) 1x Sage Silohm 50 (GB1) )
  18. Polyurethane Pack hose set (solid color) 4 ft .of  5/32" red, 3 ft. of 1/4" red, 2 ft. of  1/4" blue, 1 ft. of  5/32" yellow
  19. Clippard brass barbs ( 11752) and elbows (15090) x 3
  20. Legris 5/32" elbow fittings x 3  (or suitable replacement such as SMC )
  21. Legris brass 5/32" straight fittings x 2 (or suitable replacement such as SMC )
  22. PPD
  23. HGA
  24. Raytheon Crank knob (real or resin copy)
  25. V- hook (machined or suitable relacement)
  26. Split loom tubing 2 ft of 1/4" and 5 ft of 3/4" sizes
  27. Decal set
  28. Light kit and or sound kit ( a costly upgrade but well worth it) I recommend an Exoray  or Proptronix kits.

 So thats basically it in a nut shell, you can modify this list to fit your budget and the type of build you are attempting. Of course your parts selection will depend on degree of accuracy you want to attain.

You can find plans here at GBfans.com

 

proton pack

Proton gun

To complete your pack you will also need the gun or "neutrona wand"

  2. Gun handles
  3. Grips x2
  4. Heatsink
  5. Side adjustment knobs x 2
  6. Slo-blo box
  7. Trigger box
  8. Rear cylinder
  9. Front palm rest
  10. Clippard R-701 (real or resin copy)
  11. Gun ears with trigger tip
  12. Clear acrylic tip 7/8" O.D x 6" long
  13. Banjo fittings x 2 ( Legris for GB1, Nycoil for GB2)
  14. 5/32" red tubing 1 ft.
  15. Clippard brass barbs x2
  16. 1/4" Green tubing 1 ft.
  17. Baseplate
  18. Gun track
  19. V- hook (machined or suitable relacement)
  20. 4 piece Gun knobs ( aluminum or resin copy)
  21. Light caps
  22. Light kit with switches , I recommend Exoray or Proptronix kits.

 

Again, you can modify this list to fit your budget and the type of build you are attempting. Of course your parts selection will depend on degree of accuracy you want to attain.

proton gun