Multimediamayhem

#P131  Ribbon cable kit ( 2 #8 Allen bolts and 1 #10 Allen bolt included)  $21 set

 more accurate design and LOWER price!

24" length

#P138 "L" bracket mounting kit  $ 10 set

Includes:

4 - Aluminum "L " brackets (pre-drilled for rivets by request)

10- 3/16" wide flange rivets

4 - 1/4" Allen bolts and washers

You will need a 1/4" tap and 7/32" drill bit for pack shell mounting

#P139 3/16" wide flanged rivets   $4 for 10 pieces

#P004 Aluminum Motherboard    $49.99              Our best seller!

• Quality laser cut to spec. pre-cut holes for ALICE pack mounting
• 1/8" aluminum
• ready for paint

#P014 Ribbon cable clamp set (2 piece) with 2 #8-32 Allen bolts   New LOWER price! $10

• ribbon cable sold seperately see item #P082

 #P035 Ribbon cable P-clamp   $2.50 each *#10 bolt included

#P005 Dixie style V-hook, 2 part, steel construction with Aluminum spacer. An affordable alternate to the machined aluminum ones. Not screen accurate but secure!   $10 set

Includes all 3 pieces!

#P107 *Aluminum spacer for V-hook   $3 each

1/4" thick laser cut aluminum

*Used on the proton pack to space the V-hook out from pack shell. You will have to drill holes at the angle you need.

 #P076 Spectre hunter  version 1    Now $20    with added Clippard brass elbow (11752-1 /15090-1)          

Aluminum block with 1/4" dia. brass rods, countersunk for #10 Allen screws for mounting (included)

 * I make these myself on my drill press, they are not done in a professional machine shop

#P043         Spectre hunter  version 2          Now $14.99   Price just lowered!

#P082   Spectra strip ribbon cable   New lower price $10

• 24" length, enough for one pack
• correct #132-2801-060, thirty twisted pairs

#P097        5/32" SMC elbow   $6 each 

* Suitable replacement for the hard to find Legris elbow, can be easily painted gray with model paints.

#P098 5/32" SMC elbows set of 3    $16 per set  SAVE $2 

#P121 5/32" SMC straight fitting set of 2   $14 per set 

* Suitable replacement for the hard to find Legris straight, can be easily painted gray with model paints.

#P010 GB1 3 piece resistor set   $16

Sage silohm 50 

Dale PH-25

Sage silohm 25

 *Also sold seperately $6 each

Need to do up your whole pack? Here's a complete set of hoses, pre cut to length

#P038   $10.99 set  

 You get :

• 4 ft. 5/32" red
• 3 ft. 1/4" red
• 2 ft. 1/4" blue
• 1 ft. 1/4" or 5/32" yellow
• 1 ft. 1/4" green

As an added BONUS we will include 1 ft. of the 1/4" split loom to use as boots

#P015  5/32" Red polyurethane tubing ( Nycoil brand  ) $1 per foot

Placement:

•  from Legris elbow on cyclotron to Legris straight fitting on side of booster
•  from other Legris straight fitting on booster to HGA elbow
•  from 5/32" banjo fitting to 5/32" banjo fitting on gun tip

#P036 1/4" RED polyurethane tubing (Nycoil brand) $1 per foot 

Placement:

•  on injector tube to cyclotron
• from beam line to HGA brass barb, *covered with 1/4" split loom

#P037   1/4" Blue polyurethane tubing (Nycoil brand)  $1 per foot

Placement:

•  on PPD from cylinder to Dale RH-50 on Ion arm
•  on injector to cyclotron
• Also on GB1 packs from RH-50 to Clippard elbow on Ion arm

#P016  1/4" Yellow polyurethane tubing (Nycoil brand ) $1 per foot

Placement:

• on the pack from the Legris elbow on the Ion arm to the Sage resistor on the side of the Ion arm

#P048 (limited quantities) 5/32" Yellow polyurethane tubing (Nycoil brand) $1 per foot

#P017 1/4" Green vinyl tubing (Clippard or Nycoil brand available )  $1 per foot

Placement:

•  on the Proton wand from rear cylinder brass barb  to instrument block brass barb

See some parts you need?

Contact us to make a purchase

Multimediamayhem proudly supports the Canadian Cancer Societies Until Cures Are Found program. A monthly contribution is made from proceeds of sales from this site. Your purchases help fund vital  Cancer treatments and research as well as early detection programs.